R&F Woodworking
Tips & Jigs

Information About Links

Links

 

Cove cutting on the Table saw.  The link will take you to a page with many different profiles shown for different blade angles and tilt

Article in American Woodworker Magazine on how to cut coved doors on the table saw.

Article in Fine Woodworking on Cutting and Calculating Cove Angle Calculation.

Article on Cutting Curved Coves on a Table Saw

Cove Profiles

 

AWW Article

FWW Article

Curved Coves

Information on fixture for cutting tapered flute ends

Flute Fixture

 This link is to my tests that were performed on the jointer to see what type of condition could be expected for each condition.

 

Article by Gary Rogowski, An Edge-Jointing Primer, both hand and machine.

Jointer Table Adjustment Procedure by Mark Goodall.  The Jointer is a Delta DJ20, but a lot of the info apples to other MFG

Jointer Adjustment by Jim del Toro.  The information is under Tool Adjustment on his web site.

How to tune a jointer by David Eisan.  The info is on the Old Woodworking Machines web site under Frequently Asked Questions.

Jointer Test

Edge-Jointing Primer

ADJ Procedure

Jointer Tune-Up

How to tune a jointer

Cutting Dovetails in Baltic Birch and Drawer Information.

Dovetail Info

Indicators in Woodworking

Indicator Info

Poor man's Kreg Pro Jig - Rocket Jig added to Melamine base with EBay Toggle

Poor Man's Kreg

Kick Switch/Safety Switch for the Table saw - Simple 1x3x18 attached to Unifence Rail with small hinge, 1x1x5 attached at 90 deg. positioned to hit stop button.

Kick Switch 1

Kick Switch 2

Simple Splitter and Push Block

Splitter

   
   

Woodworking Links

 
   
   

 
 
 

R&F Woodworking,  Warrenton, Missouri